UPVC Window Handle Replacement
Replacing a damaged window handle is a relatively easy process, and with the right tools it can be done quite quickly. It is important to identify the type of handle and its spindle length before buying a replacement.
Older uPVC window handles have a spur that protrudes and locks on the wedge striker. These can be either left or right-handed and must be to be replaced with the same handle.
What type of lock and handle do I need?
There are many different types of window handles made from upvc and locks, each with their own benefits and purposes. The type of handle you own will determine whether or not the locking mechanism you have is effective and if it is easy to open windows. With time and regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to fix them as soon as you can. This will help avoid burglaries and protect your home from burglary.
It’s a task that almost anyone can do. With just a few tools and the right information it’s a straightforward process that shouldn’t take less than a few minutes. To get started you must identify the type of lock and handle you have on your window to help you find the perfect replacement.
Inline Espagnolette Handles
These are the most common kind of upvc handle and are usually located on the outside of your window. They are flat and feature an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles come with an elongated spindle that runs through middle of the handle to the window frame to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame and aren’t as secure as other types of sash window replacement handles.
Handles that turn and tilt
In contrast to other handles made of upvc the tilt and turn handles can be rotated to open the window and tilted inwards to let air flow in. They typically feature a 7mm spindle on the side of the handle. They are available in both left and right handed versions.
It is essential to know the size of the spindle when purchasing a replacement handles made of upvc. There are a few that are the exact same size. Drop something in the middle of the hole to test the length. This is the maximum spindle length that will fit your window.
What is the spindle?
uPVC window handles function in a similar manner to doors. By turning the handle, you are able to operate a latch within the frame. The latch opens the window, so that it can be opened and closed. The handles can become damaged, especially if they’re often used or are exposed to harsh environments. It is possible to replace the handles on your uPVC window if they are not able to operate it correctly.
There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in various ways, UPVC Window Handle Replacement and each type of handle has a particular spindle that is used to lock the mechanism into the window. This is why it is crucial to know the type of handle you have installed on your uPVC window to find the right replacement.
The base section of the handle will tell you what kind of uPVC it is. A snap-in cover is over the screw that holds the handle’s base in position. Take it off and you should be able see the second holding screw on the opposite side of the base portion of the handle. After both screws are removed, you should be able take the handle out of the uPVC.
After removing the uPVC handle, remove it from the locking mechanism. Note the length of the spindle. You’ll need to purchase a replacement with the same length as the original handle and locking device.
The spindle wears out and is unable to operate the locking mechanism. This could be due to damage from constant use, a loosening of the locking mechanism or even rust over time. If this occurs, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I get rid of my old handle?
Window handles are susceptible to being damaged or broken over time. It is important to fix them as quickly a possible to ensure your security. It is simple to replace a worn or damaged handle. The job can be completed in under a minute without the need for any special tools.
To take off the handle, you must first remove the screw at the bottom of the handle. Once the screw has been removed, the handle will be removed. A second screw will be located at the bottom of the handle. This can also be removed. After the two screws are removed, the handle can be detached from the base of the window.
After removing the old handle and fixing holes, align the holes of the new handle to the existing holes in the window frame. There may be a little cap or sticker on the new handle, so take off them if needed and then screw the handle in the frame. Once the handle is set, it is essential to check that it works by turning the handle and ensuring that the lock mechanism activates.
Espag handles come with a spindle which protrudes out of the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window replacement cost or the transom crossmember of the bar.
Once you have the new handle in place, slide the spindle inside the window lock and then tighten it. Once the handle is securely fixed in place and secured, replace the snap-in cover and screw cap (if necessary). The handle is now ready to use to use, so try opening and closing the window several times to make sure that it is working properly and securely.
How do I put in the new handle?
Changing your uPVC window handle isn’t difficult, and the process is quite simple. You only need a screwdriver, and a bit of perseverance. The first thing you need to do is ensure that the handle you have previously used is not locked and then take out any screws that are visible, you can replace them with screw caps if needed. After removing the handle and you are ready to take a note of the length of the spindle which protrudes from the back of the handle. This is crucial since it will determine the type of handle you’ll need to buy.
Espagnolette handles that are made of uPVC are the most well-known kind of handle. They feature a spindle that runs through the handle and acts as an internal locking mechanism within the frame of the window. Once the handle is turned it releases the latch on the window, allowing it to open. Over time and through regular use, espagnolette handles can become damaged or impaired and it is necessary to find an alternative.
Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are more secure than the espagnolette handles because they are able to open from the inside. They can be replaced with the same procedure as espagnolette handles, however you must make sure that the new handle has a curved blade, as opposed to a flat one.
After you have picked the correct handle, you can align the new handle to existing screw holes before screwing it into place. After that, you can put the screw covers on and test your new handle. You can accomplish this by dragging the handle between the locked position to the unlocked a few time. If you encounter any issues, it may be beneficial to speak with a professional to determine if they can help resolve the problem. They can often advise you on the best approach to solve the issue in a speedy and effective way.
